Charcoal Gloss Intergrated Thermofoil Kitchen Cabinets With Soft Closing Drawers

What are Thermofoil Cabinets?

Despite its name, thermofoil contains no metallic materials. Rather, thermofoil is a type of vinyl. Using heat, the vinyl is fused to a wooden surface, usually particleboard. The result is a kitchen cabinet with a smooth, seamless finish. Thermofoil is most often seen in white or off-white, although some manufacturers offer a variety of colors and even faux wood finishes. Thermofoil is also sometimes applied to existing cabinets as a refinishing technique. If you choose this option, be sure to use a professional with positive references, as the results can vary widely.

How to package goods

It usually uses two methods for kitchen cabinet packing.

One is RTA (Ready to assemble) and the other is fully assembled. As to the glass and countertops, we use cartons for packing and reinforce them with wooden frames to avoid breakage in transit.

RTA (Ready to assemble) Packing Procedure:

1. After production and inspection of kitchen cabinets, they will be packed in cartons next. First of all, foamed plastics are placed at the bottom of the carton ready for panels packing.

2. And then, every panel in cartons is separately lined with EPE foam sheets and air bubble films.

3. After finishing that, foamed plastics are placed at the top of carton to ensure that panels are wrapped very well.

MELONI is strict to the packing of the material, because of inadequate packing. Light person cause broken edges and corners, the person that weigh is likely to fracture. Transportation takes care of the wrong. Increased scrap and incomplete defective quantity. We usually provide wooden caseswooden case packing:

For long distance transportation, more commonly adopted. The plank smooth. Sequence set in a box lined with waterproof paper, or 2 ~ 4 piece of rope in trunk, trunk space must be plugged with elastic soft materials. Substandard materials shall not be used wooden box, wooden plank thickness shall not be less than 20 mm. Each carton should be set up at both ends of the iron waist band, rail is set on the Angle iron.